點膠機動作一種常用的產業擺設被普遍的運用于醫藥，化學工業，電子等范圍，然而對于點膠機的工藝訴求有哪些呢？即日機動點膠機廠家創盈期間的本領職員就精細的為大師解讀一下。

Dispensing machine, as a common industrial equipment, has been widely used in medicine, chemical industry, electronics and other fields. But what are the technological requirements for dispenser? Today, the technicians of the automatic dispensing machine factory create a detailed interpretation for you.

全機動點膠機

1.所用膠水的攙和比率。任何一種點膠機對膠水的攙和比率都有一個范疇，罕見的有100：100到100：10，即使所用的膠水不在這個范疇，那就要從新商量了。

The mixing ratio of 1. used glue. Any kind of glue dispenser has a range of mixing ratio for glue. It is common from 100:100 to 100:10. If the glue is not in this range, it should be reconsidered.

2.膠水內里有沒有填料，如氧化鐵，氧化硅，石英砂，陶瓷等。即使有填料，在采用雙液點膠機時，就須要精心商量。雙液點膠機遏制出膠量的辦法有兩種，一種是經過牙輪泵，一種是經過螺桿泵!牙輪泵在遇到含有填料的膠水時，功夫久了易磨損，從而形成出膠量不準，攙和比率不透徹，展示點出來的產物長功夫不干。螺桿泵比擬較而言，較耐磨損少許，那些可參考一下這兩種泵的材料!

Is there any filler in glue, such as alumina, silica, quartz sand, ceramics and so on. If there is filler, when selecting two liquid dispensers, we need to consider carefully. There are two ways to control the amount of glue. One is through the gear pump and the other is through the screw pump. The gear pump is easy to wear for a long time when it meets the glue containing the stuffing. Then, the quantity of the glue is not allowed, the proportion of the mixing is not accurate, and the product that comes out is not dry for a long time. Compared with the screw pump, it is more resistant to wear. These can refer to the information of these two pumps.

3.所重心的產物，歷次最小的點膠量是幾何，比方你重心的產物是1克，膠水配比是10：1，那十分于B膠的出膠量要到達0.1克，呆板的最小出膠量是幾何，你買呆板時就要比較比擬，看是否到達訴求!

Main points of the product, the minimum amount of glue each time, such as your key product is 1 grams, the glue ratio is 10:1, that is equivalent to the glue quantity of B glue to reach 0.1 grams, the minimum quantity of machine glue is how much, when you buy the machine compare comparison, see whether to meet the requirements!

4.消費的產量，量大的話可商量帶XYZ板滯手，大概多并頭的點膠機，量小的話，用單頭，以至不帶XYZ板滯手的都可實行。點膠工藝的訴求，要不抽真空，將膠水內里的氣泡抽出。

The output of the production, the large amount of words can take into account with the XYZ manipulator, or multi side of the glue machine, small amount of words, with a single head, or even without a XYZ manipulator can be completed. The requirement of dispensing process is to evacuated the bubbles in the glue without vacuuming.

深圳市創盈期間高科技有限公司是一家潛心于平臺點膠機，落地式點膠機，視覺點膠機，非標準化機動化擺設的研制消費和出賣于一體的國度高新技術本領點膠機廠家。

正文要害字：點膠銑工藝訴求

專題推薦：

江門回收廢鋁

江門回收廢銅

江門回收廢鐵

江門回收廢紙

江門廢紙回收

江門廢塑料回收

江門廢銅回收

江門廢鋁回收

江門廢鐵回收

中山廢品回收

廣東廢品回收

江門廢品回收

江門起重機安裝

江門廢品站